View ADL5601ARKZ_7397642.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

50 mhz to 4.0 ghz rf/if gain block data sheet adl5601 rev. a document feedback information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is g ranted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062 - 9106, u.s.a. tel: 781.329.4700 ? 2009C 2013 analog devices, inc. all rights reserved. technical support www.analog.com features fixed gain of 15 db operation from 50 mhz to 4.0 ghz highest dynamic range gain block input/output internally matched to 50 ? integrated bias control circuit oip3 of 43.0 dbm at 900 mhz p1db of 19.0 dbm at 900 mhz noise figure of 3.7 db at 900 mhz single 5 v power supply low quiescent current of 8 3 ma thermally efficient sot - 89 package esd rating of 1 .5 kv (class 1c) functional block dia gram rfin gnd rfout 1 2 3 gnd adl5601 (2) bias 08219-001 figure 1 . general description the adl5601 is a broadband , 15 db linear amplifier that operates at frequencies up to 4 .0 ghz. the device can be used in a wide variety of cellular, cable television ( catv ) , military, and instru - mentation equipment. the adl5601 provides the highest dynamic range available from an internally matched gain block. this is accomplished by providing extremely low noise figures and very high oip3 speci - fications simultaneously, across the entire 4 .0 ghz frequency range. the adl5601 provides a gain of 15 db, which is stable over frequency, temperature, and supply voltage , as well as from device to device. the device is inter nally matched to 50 ? at the input and output, making the adl5601 very easy to implement in a wide variety of applications. only input/output ac coupling capacitors, power supply decoupling cap acitors, and an external inductor are required for operation. the adl5601 is fabricated on an ingap heterojunction bipolar transistor ( hbt ) process and has an esd rating of 1 .5 kv (class 1c). the device is available in a thermally efficient sot - 89 package. the adl5601 consumes 83 ma on a single 5 v supply and is fully specified for operation from ? 40c to +85c. a fully populated rohs - compliant evaluation board is available.
adl5601 data sheet rev. a | page 2 of 16 table of contents features .............................................................................................. 1 functional block diag ram .............................................................. 1 general description ......................................................................... 1 revision history ............................................................................... 2 specifications ..................................................................................... 3 typical scattering parameters (s - parameters) ......................... 5 absolute maximum ratings ............................................................ 7 esd caution .................................................................................. 7 pin configuration and function descriptions ............................. 8 typical performance characteristics ............................................. 9 basic connections .......................................................................... 12 soldering information and recommended pcb land pattern ........................................... 12 w - cd ma acpr performance .................................................... 13 evaluation board ............................................................................ 14 outline dimensions ....................................................................... 15 ordering guide .......................................................................... 15 revision history 11/13 rev. 0 to rev. a added figure 15, renumbered sequentially ............................... 11 changes to figure 17 ....................................................................... 12 updated outline dimensions ........................................................ 1 5 9/0 9 revision 0: initial version
data sheet adl5601 rev. a | page 3 of 16 specifications v cc = 5 v and t a = 25c, unless otherwise noted. table 1. parameter test conditions/comments min typ max unit overall function frequency range 50 4000 mhz frequency = 50 mhz gain 15.6 db output 1 db compression poi nt (p1db) 16.3 db m output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 34.0 db m second harmonic p out = 0 dbm ?50.7 db c third harmonic p out = 0 dbm ?78.7 db c noise figure 3.9 db frequency = 140 mhz gain 15.4 db vs. frequency 50 mhz 0.05 db vs. tempe rature ?40c t a +85c 0.19 db vs. supply voltage 4.75 v to 5.25 v 0.02 db output 1 db compression point (p1db) 18.8 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 34.7 dbm second harmonic p ou t = 0 dbm ?51.1 dbc third harmonic p out = 0 dbm ?77.3 dbc noise figure 3.8 db frequency = 350 mhz gain 15.2 db vs. frequency 50 mhz 0.02 db vs. temperature ?40c t a +85c 0.20 db vs. supply voltage 4.75 v to 5.25 v 0. 02 db output 1 db compression point (p1db) 19.1 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 35.8 dbm second harmonic p out = 0 dbm ?53.8 dbc third harmonic p out = 0 dbm ?82.9 dbc noise figure 3.8 db frequency = 700 mhz gain 14.3 15.2 16.5 db vs. frequency 50 mhz 0.01 db vs. temperature ?40c t a +85c 0.21 db vs. supply voltage 4.75 v to 5.25 v 0.02 db output 1 db compression point (p1db) 18.0 19.0 dbm output th ird - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 40.7 dbm second harmonic p out = 0 dbm ?55.6 dbc third harmonic p out = 0 dbm ?77.9 dbc noise figure 3.8 db
adl5601 data sheet rev. a | page 4 of 16 parameter test conditions/comments min typ max unit frequency = 900 mhz gain 14.3 15.3 16.5 db vs. fre quency 50 mhz 0.01 db vs. temperature ?40c t a +85c 0.22 db vs. supply voltage 4.75 v to 5.25 v 0.02 db output 1 db compression point (p1db) 18.0 19.0 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm pe r tone 43.0 dbm second harmonic p out = 0 dbm ?57.6 dbc third harmonic p out = 0 dbm ?78.7 dbc noise figure 3.7 db frequency = 2000 mhz gain 14.2 db vs. frequency 50 mhz 0.08 db vs. temperature ?40c t a +85c 0.27 db v s. supply voltage 4.75 v to 5.25 v 0.03 db output 1 db compression point (p1db) 17.5 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 34.2 dbm second harmonic p out = 0 dbm ?41.9 dbc third harmonic p ou t = 0 dbm ?67.3 dbc noise figure 4.5 db frequency = 2600 mhz gain 13.4 db vs. frequency 50 mhz 0.04 db vs. temperature ?40c t a +85c 0.20 db vs. supply voltage 4.75 v to 5.25 v 0.04 db output 1 db compression point (p1 db) 16.0 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 30.7 dbm second harmonic p out = 0 dbm ?46.4 dbc third harmonic p out = 0 dbm ?65.4 dbc noise figure 4.7 db frequency = 3500 mhz gain 12.9 db vs. frequency 50 mhz 0.06 db vs. temperature ?40c t a +85c 0.32 db vs. supply voltage 4.75 v to 5.25 v 0.05 db output 1 db compression point (p1db) 14.2 dbm output third - order intercept (oip3) f = 1 mhz, output power ( p out ) = 0 dbm per tone 26.7 dbm second harmonic p out = 0 dbm ?41.0 dbc third harmonic p out = 0 dbm ?62.4 dbc noise figure 5.5 db frequency = 4000 mhz gain 12.1 db vs. frequency 50 mhz 0.11 db vs. temperature ?40c t a +85 c 0.50 db vs. supply voltage 4.75 v to 5.25 v 0.05 db output 1 db compression point (p1db) 12.7 dbm output third - order intercept (oip3) f = 1 mhz, output power (p out ) = 0 dbm per tone 24.7 dbm second harmonic p out = 0 dbm ?41.0 dbc th ird harmonic p out = 0 dbm ?59.7 dbc noise figure 6.1 db
data sheet adl5601 rev. a | page 5 of 16 parameter test conditions/comments min typ max unit power interface vcc supply voltage (v cc ) 4.5 5.0 5.5 v supply current 83 100 ma vs. temperature ?40c t a +85c 2.3 ma power dissipation v cc = 5 v 0.42 w typical sc attering parameters (s - parameters) v cc = 5 v , t a = 25 c, and the effects of the evaluation board ha ve been de embedded up to the pins of the device. table 2. freq uency (mhz) s11 s21 s12 s22 magnitude (db) angle () magnitude (db) angle () magnitude (db) angle () magnitude (db) angle () 50 ? 20.65 ? 144.57 + 15.59 + 161.69 ? 19.76 ? 7.97 ? 16.61 ? 168.75 100 ? 25.05 + 175.09 + 15.34 + 149.77 ? 19.85 ? 24.47 ? 16.06 + 164.97 150 ? 25.57 + 149.73 + 15.27 + 136.48 ? 19.89 ? 38.84 ? 15.85 + 145.84 200 ? 24.93 + 130.36 + 15.20 + 122.75 ? 19.92 ? 52.66 ? 15.63 + 128.22 250 ? 24.24 + 114.36 + 15.14 + 108.91 ? 19.96 ? 66.22 ? 15.49 + 112.53 300 ? 23.29 + 101.24 + 15.07 + 95.06 ? 19.99 ? 79.64 ? 15.40 + 98.52 350 ? 22.53 + 88.38 + 15.02 + 81.26 ? 20.03 ? 92.91 ? 15.35 + 84.79 400 ? 22.07 + 76.45 + 14.97 + 67.39 ? 20.05 ? 106.12 ? 15.38 + 71.26 450 ? 21.78 + 66.13 + 14.94 + 53.57 ? 20.07 ? 119.35 ? 15.48 + 58.84 500 ? 21.51 + 55.91 + 14.92 + 39.81 ? 20.08 ? 132.53 ? 15.68 + 46.57 550 ? 21.57 + 46.37 + 14.90 + 25.97 ? 20.09 ? 145.77 ? 16.07 + 34.25 600 ? 21.78 + 38.11 + 14.89 + 12.17 ? 20.10 ? 159.04 ? 16.65 + 22.42 650 ? 22.13 + 30.61 + 14.89 ? 1.54 ? 20.10 ? 172.37 ? 17.41 + 10.91 700 ? 22.68 + 23.62 + 14.88 ? 15.54 ? 20.11 + 174.38 ? 18.36 ? 0.29 750 ? 23.43 + 18.47 + 14.89 ? 29.41 ? 20.11 + 161.06 ? 19.65 ? 10.39 800 ? 24.35 + 16.37 + 14.89 ? 43.49 ? 20.11 + 147.71 ? 21.34 ? 18.60 850 ? 25.29 + 16.28 + 14.89 ? 57.51 ? 20.12 + 134.31 ? 23.41 ? 25.16 900 ? 25.88 + 20.10 + 14.88 ? 71.67 ? 20.13 + 120.86 ? 25.86 ? 26.32 950 ? 25.90 + 25.78 + 14.87 ? 85.39 ? 20.14 + 107.34 ? 28.12 ? 18.10 1000 ? 25.31 + 29.70 + 14.87 ? 99.48 ? 20.16 + 93.84 ? 28.73 ? 1.68 1050 ? 24.16 + 29.42 + 14.86 ? 113.64 ? 20.18 + 80.32 ? 27.11 + 8.91 1100 ? 23.38 + 25.45 + 14.83 ? 127.83 ? 20.22 + 66.77 ? 25.16 + 5.98 1150 ? 22.70 + 20.88 + 14.81 ? 141.81 ? 20.25 + 53.39 ? 23.33 + 1.75 1200 ? 22.10 + 13.43 + 14.80 ? 155.93 ? 20.27 + 39.79 ? 22.27 ? 8.80 1250 ? 21.81 + 4.90 + 14.78 ? 170.15 ? 20.31 + 26.19 ? 21.38 ? 21.30 1300 ? 21.78 ? 4.74 + 14.75 + 175.70 ? 20.35 + 12.56 ? 20.75 ? 35.07 1350 ? 21.96 ? 15.31 + 14.72 + 161.57 ? 20.40 ? 1.10 ? 20.35 ? 50.07 1400 ? 22.31 ? 27.46 + 14.68 + 147.40 ? 20.44 ? 14.74 ? 20.06 ? 66.34 1450 ? 22.92 ? 40.13 + 14.64 + 133.17 ? 20.50 ? 28.45 ? 19.80 ? 83.25 1500 ? 23.53 ? 55.61 + 14.60 + 118.79 ? 20.56 ? 42.17 ? 19.60 ? 100.18 1550 ? 24.04 ? 74.40 + 14.56 + 104.52 ? 20.62 ? 55.96 ? 19.29 ? 117.80 1600 ? 24.50 ? 95.46 + 14.49 + 90.23 ? 20.70 ? 69.82 ? 18.83 ? 135.14 1650 ? 24.13 ? 118.14 + 14.43 + 75.97 ? 20.79 ? 83.66 ? 18.22 ? 150.53 1700 ? 23.01 ? 140.97 + 14.37 + 61.50 ? 20.89 ? 97.51 ? 17.57 ? 164.65 1750 ? 21.46 ? 161.36 + 14.27 + 47.04 ? 21.00 ? 111.39 ? 16.78 ? 177.64 1800 ? 19.67 ? 178.55 + 14.18 + 32.52 ? 21.12 ? 125.37 ? 15.91 + 170.73 1850 ? 17.73 + 167.17 + 14.07 + 18.07 ? 21.26 ? 139.35 ? 14.91 + 160.24 1900 ? 15.95 + 154.24 + 13.92 + 3.63 ? 21.42 ? 153.36 ? 13.88 + 150.20 1950 ? 14.26 + 141.96 + 13.77 ? 10.89 ? 21.60 ? 167.35 ? 12.82 + 140.45 2000 ? 12.72 + 130.33 + 13.60 ? 25.40 ? 21.81 + 178.67 ? 11.79 + 130.63 2050 ? 11.36 + 119.00 + 13.39 ? 39.85 ? 22.05 + 164.79 ? 10.77 + 120.32
adl5601 data sheet rev. a | page 6 of 16 freq uency (mhz) s11 s21 s12 s22 magnitude (db) angle () magnitude (db) angle () magnitude (db) angle () magnitude (db) angle () 2100 ? 10.11 + 107.84 + 13.16 ? 54.15 ? 22.31 + 150.95 ? 9.78 + 109.99 2150 ? 9.04 + 96.61 + 12.90 ? 68.23 ? 22.60 + 137.28 ? 8.88 + 99.58 2200 ? 8.12 + 85.63 + 12.63 ? 82.16 ? 22.91 + 123.82 ? 8.12 + 88.80 2250 ? 7.33 + 74.68 + 12.34 ? 95.90 ? 23.24 + 110.57 ? 7.45 + 77.69 2300 ? 6.66 + 63.86 + 12.04 ? 109.35 ? 23.59 + 97.61 ? 6.85 + 66.77 2350 ? 6.11 + 53.33 + 11.75 ? 122.46 ? 23.92 + 84.90 ? 6.37 + 55.88 2400 ? 5.65 + 42.82 + 11.46 ? 135.36 ? 24.25 + 72.46 ? 6.00 + 44.86 2450 ? 5.28 + 32.51 + 11.18 ? 147.97 ? 24.57 + 60.24 ? 5.68 + 33.86 2500 ? 5.00 + 22.51 + 10.94 ? 160.34 ? 24.86 + 48.34 ? 5.44 + 23.12 2550 ? 4.78 + 12.49 + 10.73 ? 172.61 ? 25.12 + 36.64 ? 5.29 + 12.46 2600 ? 4.64 + 2.62 + 10.56 + 175.37 ? 25.33 + 25.08 ? 5.19 + 1.65 2650 ? 4.54 ? 7.06 + 10.43 + 163.51 ? 25.52 + 13.55 ? 5.13 ? 9.06 2700 ? 4.50 ? 16.80 + 10.35 + 151.65 ? 25.66 + 2.20 ? 5.13 ? 19.67 2750 ? 4.52 ? 26.55 + 10.31 + 139.80 ? 25.74 ? 9.14 ? 5.19 ? 30.41 2800 ? 4.60 ? 36.24 + 10.32 + 127.87 ? 25.78 ? 20.59 ? 5.27 ? 41.23 2850 ? 4.72 ? 46.09 + 10.37 + 115.83 ? 25.79 ? 32.13 ? 5.40 ? 52.01 2900 ? 4.92 ? 56.14 + 10.47 + 103.58 ? 25.75 ? 43.77 ? 5.60 ? 62.93 2950 ? 5.18 ? 66.18 + 10.60 + 91.16 ? 25.67 ? 55.71 ? 5.86 ? 74.10 3000 ? 5.52 ? 76.58 + 10.76 + 78.44 ? 25.57 ? 67.81 ? 6.16 ? 85.27 3050 ? 5.95 ? 87.31 + 10.96 + 65.65 ? 25.45 ? 80.30 ? 6.57 ? 96.63 3100 ? 6.50 ? 98.20 + 11.16 + 52.38 ? 25.30 ? 93.05 ? 7.07 ? 108.36 3150 ? 7.17 ? 109.56 + 11.37 + 38.77 ? 25.16 ? 106.14 ? 7.65 ? 120.33 3200 ? 7.96 ? 121.53 + 11.59 + 24.80 ? 25.03 ? 119.49 ? 8.35 ? 132.41 3250 ? 8.95 ? 134.08 + 11.77 + 10.48 ? 24.91 ? 133.23 ? 9.19 ? 144.97 3300 ? 10.11 ? 147.58 + 11.94 ? 4.10 ? 24.71 ? 148.47 ? 10.19 ? 157.59 3350 ? 11.43 ? 162.30 + 12.09 ? 18.93 ? 24.64 ? 162.78 ? 11.23 ? 171.07 3400 ? 12.93 ? 178.72 + 12.18 ? 34.00 ? 24.61 ? 177.32 ? 12.44 + 174.45 3450 ? 14.51 + 161.78 + 12.24 ? 49.17 ? 24.63 + 168.07 ? 13.64 + 158.38 3500 ? 15.96 + 138.82 + 12.26 ? 64.42 ? 24.69 + 153.27 ? 14.74 + 140.90 3550 ? 16.86 + 111.84 + 12.24 ? 79.75 ? 24.80 + 138.48 ? 15.67 + 121.24 3600 ? 16.83 + 83.89 + 12.17 ? 95.04 ? 24.97 + 123.67 ? 16.20 + 98.98 3650 ? 15.98 + 58.24 + 12.06 ? 110.33 ? 25.15 + 108.97 ? 15.98 + 76.14 3700 ? 14.75 + 36.92 + 11.92 ? 125.55 ? 25.39 + 94.34 ? 15.33 + 55.10 3750 ? 13.43 + 18.94 + 11.76 ? 140.74 ? 25.66 + 79.90 ? 14.38 + 35.05 3800 ? 12.23 + 3.37 + 11.54 ? 155.80 ? 25.97 + 65.42 ? 13.18 + 17.14 3850 ? 11.21 ? 10.83 + 11.31 ? 170.64 ? 26.33 + 51.35 ? 12.03 + 1.60 3900 ? 10.32 ? 24.29 + 11.05 + 174.74 ? 26.71 + 37.49 ? 11.04 ? 12.99 3950 ? 9.59 ? 37.18 + 10.78 + 160.27 ? 27.07 + 23.89 ? 10.13 ? 27.31 4000 ? 8.99 ? 49.64 + 10.49 + 146.04 ? 27.43 + 10.62 ? 9.28 ? 40.73
data sheet adl5601 rev. a | page 7 of 16 absolute maximum rat ings table 3. parameter rating supply voltage, v cc 6.5 v input power ( referred to 50 ?) 16 dbm internal power dissipation (paddle soldered) 600 mw ja (junction to air ) 30.7 c/w jc (junction to paddle) 5.0 c/w maximum junction temperature 150c lead temperature (soldering , 60 sec) 240 c operating temperature range ?40 c to +85 c storage temperature range ?65 c to +150c stresses above those listed under absolute maimum ratings may cause permanent damage to the device. this is a stress rating only functional operation of the device at these or any other conditions above tho se indicated in the operational section of this specification is not implied. eposure to absolute maimum rating conditions for etended periods may affect device reliability. esd caution
adl5601 data sheet rev. a | page 8 of 16 pin configuration an d function descripti ons 08219-002 rfin gnd rfout 1 2 3 gnd adl5601 top view (not to scale) (2) notes 1. the exposed paddle is internally connected to gnd and must be soldered to a low impedance ground plane. figure 2 . pin configuration table 4 . pin function descriptions pin o. nemonic description 1 rfin rf input. this pin requires a dc blocking capacitor. 2 gnd ground. connect this pin to a low impedance ground pla ne. 3 rfout rf output and supply voltage. a dc bias is provided to this pin through an inductor that is connected to the external power supply. the rf path requires a dc blocking capacitor. (2) exposed paddle exp osed paddle. the exposed paddle is i nterna lly connected to gnd and must be s older ed to a low impedance ground plane.
data sheet adl5601 rev. a | page 9 of 16 typical performance characteristics 08219-020 0 5 10 15 20 25 30 35 40 45 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 nf, gain, p1db, oip3 (db, dbm) frequency (ghz) oip3 p1db gain nf figure 3. noise figure, gain, p1db, and oip3 vs. frequency 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 gain (db) frequency (ghz) ?40c +85c +25c 0 8219-004 figure 4. gain vs. fr equency and temperature 0 8219-021 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 frequency (ghz) ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 s-parameters (db) s11 s12 s22 figure 5. input return loss (s11), output return loss (s22), and reverse isolation (s12) vs. frequency 5 10 15 20 25 30 35 40 45 10 12 14 16 18 20 22 24 26 oip3 (dbm) p1db (dbm) frequency (ghz) 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 ?40c +85c +25c ?40c +85c +25c 08219-006 figure 6. p1db and oip3 vs. frequency and temperature 18 20 22 24 26 28 30 32 34 36 38 40 42 44 ?10?8?6?4?20246810121416 oip3 (dbm) p out per tone (dbm) 900mhz 700mhz 2000mhz 4000mhz 350mhz 140mhz 50mhz 2600mhz 3500mhz 08219-007 figure 7. oip3 vs. output power (p out ) and frequency 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 frequency (ghz) 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 noise figure (db) +25c +85c ?40c 08219-008 figure 8. noise figure vs. frequency and temperature
adl5601 data sheet rev. a | page 10 of 16 08219-022 ?90 ?80 ?70 ?60 ?50 ?30 ?40 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 harmonics (dbc) frequenc y (ghz) h2 h3 figure 9 . single - tone harmonics vs. frequency , p out = 0 dbm 0 10 20 30 40 50 60 70 80 90 14.5 14.7 14.9 15.1 15.3 15.5 15.7 15.9 percen t age (%) gain (db) 08219-0 1 1 figure 10 . gain distribution at 9 00 mhz 0 10 20 30 40 50 60 18.4 18.6 18.8 19 19.2 19.4 19.6 percen t age (%) p1db (dbm) 08219-012 figure 11 . p1db distribution at 9 0 0 mhz 0 10 20 30 40 50 60 70 80 38 39 40 41 42 43 44 45 46 47 48 49 percen t age (%) oip3 (dbm) 08219-010 figure 12 . oip3 distribution at 9 00 mhz, p out = 0 dbm 08219-023 0 10 20 30 40 50 60 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 percen t age (%) noise figure (db) figure 13 . noise figure distr ibution at 9 00 mhz 72 90 92 ?40 ?30 ?20 ?10 0 10 20 30 40 50 60 70 80 90 supp l y current (ma) temper a ture ( c) 5.25v 4.75v 5v 74 76 78 80 82 84 86 88 08219-014 figure 14 . supply current vs. temperature
data sheet adl5601 rev. a | page 11 of 16 100 75 80 85 90 95 ?6 ?4 ?2 0 2 4 6 8 10 12 14 16 18 20 22 08219-100 supply current (ma) p out (dbm) +25c ?40c +85c figure 15 . supply current vs. p out and temperature v cc = 5 v
adl5601 data sheet rev. a | page 12 of 16 basic connections the basic connections for operating the adl5601 are shown in figure 16 . recommended components are listed in table 5 . th e input and output should be ac - couple d with appropriately sized capacitors ( the device characterization was performed with 0.1 f capacitors). a 5 v dc bias is supplied to the amplifier through the bias inductor connected to rf out (p in 3 ) . the bias voltage should be decoupled using a 1 f cap acitor , a 1.2 nf capacitor, and a 68 pf capacitor. c6 1f c5 1.2nf c4 68pf vcc rfout rfin rfin gnd gnd rfout 1 2 3 gnd adl5601 (2) c2 0.1f l1 470nh c1 0.1f 08219-015 figure 16 . basic connections soldering informatio n and recommended pcb land pattern figure 17 shows the recommended land pattern for t he adl5601 . to minimize thermal impedance, the exposed paddle on the package underside , along with pin 2, should be soldered to a ground plane. if multiple ground layers exist, they should be s titched together using vias . for more information on land pattern design and layout, refer to the an - 772 application note , a design and manufacturing guide f or the lead frame chip scale package (lfcsp) . 1.50mm 3.00mm 1.27mm 0.62mm 3.48mm 1.80mm 0.86mm 5.37mm 0.20mm 0.762mm 0.635mm 0.86mm 08219-101 figure 17 . recommended land pattern table 5 . recommended c omponents for basic connections frequency c1 c2 l1 c4 c5 c6 50 mhz to 4000 mhz 0.1 f 0.1 f 470 nh (coilcraft 0603ls - nx or equivalent) 68 pf 1.2 nf 1 f
data sheet adl5601 rev. a | page 13 of 16 w - cdma acpr performanc e figure 18 shows a plot of the adjacent channel power ratio (acpr) vs. p out for the adl5601 . the signal type used is a single wideband code division multiple access ( w - cdma ) carrier (test model 1 , 64) at 2140 mhz. this signal is generated by a very low acpr source. acpr is measured at the output by a high dynamic range sp ectrum analyzer that i ncorporates an instrument noise - correction function. the adl5601 achieves an acpr of ? 69 dbc at ?5 dbm output, at which point device noise , rather than distortion , begin s to dominate the power in the adjacent channels. at an output power of + 5 dbm, acpr is still very low at ? 56 dbc , making the device particularly suitable for power amplifier ( pa ) driver applications. 08219-024 ?75 ?70 ?65 ?60 ?55 ?50 ?45 ?40 ?20 ?15 ?10 ?5 0 5 10 acpr a t 5mhz carrier offset (dbc) p out (dbm) figure 18 . acpr vs. p out , si ngle w - cdma carrier (test model 1 , 64) at 2140 mhz
adl5601 data sheet rev. a | page 14 of 16 evaluation board figure 19 shows the evaluation board layout, and figure 20 shows the schematic for the adl5601 evaluation board. the board is powered by a single 5 v supply. the components used on the board are listed in table 6 . power can be applied to the board through clip - on leads (vcc and gn d) . 08219-018 figure 19 . evaluation board layout ( top ) c6 1f c5 1.2nf c4 68pf vcc rfout rfin rfin gnd gnd rfout 1 2 3 adl5601 (2) c2 0.1f l1 470nh c1 0.1f 08219-019 gnd figure 20 . evaluation board schematic table 6 . evaluation board configuration options component description default value c1, c2 ac coupling capacitors 0.1 f , 0402 l1 dc bias inductor 470 nh , 0603 (coilcraft 0603ls - nx or equivalent) vcc and gnd clip - on terminals for power supply c4 po wer supply decoupling capacitor 68 pf , 0603 c5 po wer supply decoupling capacitor 1.2 nf, 060 3 c6 po wer supply decoupling capacitor 1 f, 1206
data sheet adl5601 rev. a | page 15 of 16 outline dimensions compliant to jedec standards to-243 4.25 3.94 4.60 4.40 1.75 1.55 1.50 ty p 3.00 ty p end view 2.60 2.30 1.20 0.75 1 2 (2) 3 2.29 2.14 0.56 0.36 0.52 0.32 1.60 1.40 0.44 0.35 top view bottom view 2.413 2.380 2.337 1.270 1.252 1.219 0.635 0.569 0.508 09-12-2013-c pkg-003480 figure 21 . 3- lead small outline transistor package [sot- 89 ] (rk - 3) dimensions shown in m illimeters ordering guide model 1 temperature range package descrip tion package option adl560 1 arkz - r7 ?40c to +85c 3- lead sot - 89, 7 tape and reel rk -3 adl560 1- evalz evaluation board 1 z = rohs compliant part.
adl5601 data sheet rev. a | page 16 of 16 notes ? 2009 C 2013 analog devices, inc. all rights reserved. trademarks and reg istered trademarks are the property of their respective owners. d08219 - 0- 11/13(a)

▲Up To Search▲

Price & Availability of ADL5601ARKZ

	To Download ADL5601ARKZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .